1000L IBC TANK

IBC TANK is designed to adapt to the packaging, storage, and transportation of various liquid products in accordance with international maritime safety regulations, relevant national laws and regulations, and industry standards. This product is formed with good hygiene, comprehensive mechanical and physical properties, and inherent mechanical principles. The product ensures corrosion resistance to acids, alkalis, oils, and other liquids, and has advantages such as transportation, convenient use, and safe storage. It is suitable for highways, railways, and other industries Water (sea) transportation is more suitable for standard container exports. This product can be widely used in liquid manufacturing industries such as petrochemicals, dyes, intermediates, pesticides, brewing, daily chemicals, beverages, etc. It is used as a storage and transportation packaging for Class II and below dangerous goods and ordinary liquid products.

IBC TANK is blow molded using ultra-high molecular weight high-density polyethylene (HWHDPE). Axial and radial wall thickness control is used to ensure that the wall thickness of the container is relatively uniform at the symmetrical part. UV resistant agents are added to the raw material of ultra-high molecular weight high-density polyethylene (HWHDPE) to prevent aging of the container liner. There is a liquid level mark on the side of the container for easy filling. The discharge valve is made of high-density polyethylene (HDPE) and polypropylene (PP), and is connected to the container inner liner with screw teeth. EPDM or fluororubber (FPM) is used to adapt to the corrosion resistance of various liquid products. The valve handle is equipped with safety screws to prevent accidental opening. The valve outlet is equipped with an inner cover and sealing ring, and is fixed externally with a threaded cover as the secondary seal of the valve to prevent valve leakage. The upper part of the container inner liner is a filling port with a diameter of 140mm, which is connected to the filling port cover with a diameter of 160mm thread and sealed with EPDM or FPM sealing rings. The filling cover is equipped with a sampling cover and anti-theft cover to facilitate sampling. The filling cover and sampling cover are sealed with EPDM or FPM sealing rings. The anti-theft cover uses a disposable buckle and tear type anti-theft cover. An efficient pressure reducing valve is installed in the middle cover of the cover to release the gas volatilized by the liquid product or the pressure change caused by the volume change of the air in the upper part of the container during thermal expansion and contraction. The pressure reducing valve uses a breathable film to block the liquid through the air, and the pressure reducing valve and the sampling cover are sealed tightly with a taper. The container cannot withstand internal pressure. The selection of materials for various parts takes into account hygiene and corrosion resistance to liquids such as acid, alkali, and oil.

Advantages of 1000-liter IBC tank compared to 200-liter double ring drums

IBC TANK and 200-liter double ring plastic drums are two types of packaging containers commonly used in industries such as chemical, food, and daily chemical. Generally speaking, IBC tank have the best cost control compared to plastic and iron barrels, with one ton barrel filling capacity equal to five 200-liter plastic drums filling capacity. And four 200 liter plastic drums occupy the same volume, but can only hold 800 liters of material. A IBC TANK needs to be filled once, sealed once, and labeled once, while a IBC TANK (5 200 liters) needs to be filled 5 times, sealed 5 times, and labeled 5 times. So, IBC packaging not only saves costs but also improves customer work efficiency.

Advantages of IBC TANK : IBC TANK are composed of an inner container and a metal frame, and the inner container is made of high-density polyethylene blown molding, which has high strength and corrosion resistance. The outer metal frame is relatively reliable, and using IBC TANK can significantly reduce production, storage, transportation, and operating costs. Save manpower and material resources. Compared to traditional packaging, storage can save more than 30% of space, and forklift loading and unloading can reduce manual handling. Filling: 1 IBC TANK =5 200L drums, reducing repetitive operations during the filling process while avoiding waste and pollution caused by leaks and spills during the filling process.

In short, IBC tank are more convenient to use, economical and durable, and container barrels can become the mainstream product for liquid packaging. It can hold Class II and Class III dangerous goods, with a maximum liquid density of 1.5g/cm3 for Class II dangerous goods and 1.8g/cm3 for Class III dangerous goods. It can be directly loaded and unloaded with a forklift, and can be stacked for storage. The bottom is equipped with a drain valve, which facilitates, quickly, thoroughly, and safely discharging liquids. It is easy to clean and can be reused multiple times, which is beneficial for environmental protection.

Introduction to the production line of IBC ton barrel blow molding equipment:

Basic specification:

1、Product specification: 1-3 layers IBC machine. Make sure even wall thickness.

2、HDPE Material: HMWHDPE, HDPE, ABS, PP, PVC, and so on.

Meanwhile we can offer some ripe formula of material to reduce cost but ensure quality

3、Power consumption